Subaru Forester TPMS Reset: Tips and Tricks for a Successful Reset

The Forester’s Tire Pressure Monitoring System (TPMS) assists in monitoring tire pressure, an essential part of safe driving. In the event of an issue, the TPMS system will notify you through the cluster, in which case, you must perform a Subaru Forester TPMS reset.

But, if you need to reset the TPMS system, you must first grasp the proper technique. This ensures that your vehicle runs safely and effectively, eliminating any potential problems on the road.

Resetting the TPMS system on your Subaru Forester can be a simple process, but it’s essential to know the correct steps to take. The Subaru Forester is a small SUV noted for its durability and versatility on the road.

The warning light on its cluster indicates that there’s a problem with your tire air pressure, and if left unaddressed, it can lead to decreased handling and traction, which can affect your safety on the road.

So it’s best for you to perform a Subaru Forester Tire Pressure Monitoring System reset before the problem grows even bigger and becomes a headache for you.

What Is Subaru Forester TPMS

Subaru Forester TPMS Reset

The TPMS in a Forester makes it a very convenient vehicle that is suitable for taking on long journeys and family trips.

It ensures a proper safety system to let the user know if anything goes wrong with the tire pressure.

Further, this Tire Pressure Monitoring System monitors tire pressure and informs the driver if there is an issue, delivering real-time pressure information for each tire.

Basically, it is an important safety element that ensures your Forester runs smoothly and safely on the road.

It enables the driver to discover a tire problem early on, preventing further damage and saving money on tire replacement.

Its primary advantages are:

Improved Safety:

The TPMS is a crucial safety feature that ensures you have the right tire pressure, which has a direct impact on the handling, steering, and braking ability of your car. It alerts the driver if there are any tire pressure issues, lowering the risk of an accident.

Fuel Efficiency:

The TPMS enhances fuel efficiency by ensuring that the tires are properly inflated. Appropriate tire pressure minimizes rolling resistance, which means your engine works less hard, resulting in better fuel economy.

Reduced Maintenance Costs:

Because TPMS technology detects tire problems, it reduces maintenance costs while also prolonging tire life.

Subaru Forester TPMS Reset (6-Steps Process)

Subaru Forester TPMS Reset

The TPMS is meant to inform the driver when the tire pressure is too low. To clear the warning light, the system may need to be reset in some circumstances.

But, not everyone knows what is the Subaru Forester TPMS reset procedure.

You must be cautious and fully prepared before you make any adjustments to your vehicle. Once ready, you can follow these steps to reset the TPMS on a Forester.

Step 1: Verify Tire Pressure

It’s critical to confirm that all of the tires are correctly inflated to the recommended tire pressure before resetting the TPMS.

A digital tire pressure monitoring system or a tire pressure gauge can be used for this.

Step 2: Turn the Ignition Key to ON Position

Do not start the engine after turning the ignition key ON. The instrument panel’s TPMS warning light will briefly illuminate before going out.

Step 3: Find And Press The TPMS Button

Locate the TPMS reset button, which is usually in the glove box or under the steering wheel, and press and hold it.

Up until the TPMS warning light starts to flash, keep pressing and holding down the button. This often takes 5 to 10 seconds.

Step 4: Release the Button

As soon as the TPMS warning light begins to flash, let go of the reset button. During roughly 1-2 minutes, the TPMS warning light will continue to flash.

Step 5: Drive the Car

After the TPMS has been reset, drive the car for at least 10 minutes at a speed of at least 25 mph.

In doing so, the TPMS sensors will be able to calibrate themselves and send fresh data to the TPMS control module.

Step 6: Check the TPMS

After 10 minutes of driving the car, examine if the TPMS warning light has gone off. Repeat the process if the light is still on, or have a professional inspect the TPMS system.

The TPMS system in your Subaru Forester will be reset easily by following these six procedures, which are summarized above.

You can support ensuring that your Forester is working safely and effectively on the road by periodically checking and maintaining the tire pressure in your car and resetting the TPMS system as required.

Crucial FAQs About Subaru Forester TPMS

Do Subaru TPMS need to be programmed?

Yes, Subaru TPMS needs to be programmed whenever new sensors are installed or replaced.

This is necessary to ensure that the system can accurately monitor tire pressure and provide warnings to the driver if the pressure is too low.

Where is the TPMS reset button on Subaru cars?

Subaru cars do not have a dedicated TPMS reset button. Instead, the reset procedure is initiated through a series of steps using the car’s dashboard controls.

The exact steps may vary depending on the specific model and year of the car, but they typically involve navigating to the TPMS reset menu and following the instructions provided by the car’s computer.

How do I clear the TPMS warning on my Subaru Forester?

To clear the TPMS warning on a Subaru Forester, you will need to follow the reset procedure specific to your car’s model and year.

This typically involves driving the car at a certain speed for a certain amount of time and then accessing the TPMS reset menu through the car’s dashboard controls.

Once in the menu, you can initiate the reset process and the warning light should turn off.

What type of TPMS does Subaru use?

Subaru uses a direct TPMS system, which uses sensors inside each tire to directly measure tire pressure and transmit that information to the car’s computer.

This is in contrast to indirect TPMS systems, which use the car’s anti-lock brake system to indirectly monitor tire pressure based on the wheel rotation speed.

Direct TPMS systems are generally considered more accurate than indirect systems.


The Subaru Forester TPMS reset procedure is a viable solution to analyze just in case something goes wrong with the tire pressure of your vehicle.

It is a valuable system that helps ensure the safety and performance of your vehicle.

With the ability to monitor tire pressure in real-time, it provides early warning of potential tire issues and can help prevent accidents caused by low tire pressure.

Resetting the TPMS system is a simple process that can be performed by following the proper steps.

It is important to ensure that the TPMS sensors are functioning properly and are regularly maintained to ensure their accuracy.

Overall, the Subaru Forester TPMS is an excellent feature that helps maintain tire pressure and ensure your safety while driving.

With its ability to detect pressure loss, it is an essential tool to keep your vehicle running smoothly and efficiently.

Leave a Comment